 |
Camtech Cast Steel Gate Valves have been designed to meet the requirements of API 600 - ISO 104 34 / BS 1414 / API 602 / API 6D-ISO 14313 /ASME B 16.34 |
| |
|
Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 / DIN |
| |
|
End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN |
|
Butt weld end dimensions conform to ASME B 16.25 |
|
The stem nut design allows for the removal of the hand-wheel while keeping the Stem and Gate in a fixed position. |
|
Anti-frictional Ball bearings are provided in higher sizes and classes. |
|
The strength of Stem to Gate connection is stronger than the strength of the Stem at the root of the operating thread |
|
Outside screw and yoke construction |
|
All the valves provided with backseat arrangement |
|
Bi-directional shut-off |
|
The gland is of self aligning two piece type |
|
Deep stuffing box |
|
The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. |
| |
|
Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312 |
|
Solid, flexible, split wedge and double disc Gate configurations available |
|
For low temperature and cryogenic services extended bonnet as per BS 6364 available |
|
Locking arrangement |
|
Gear, Electrical, Hydraulic or Pneumatic actuator available |
